Flagship Dynamic In-ear Monitors
FD5
注:产品配图仅供参考,一切以实物为准
Beryllium-coated DLC diaphragm | Front acoustic prism
Rear volcanic field system | Semi-open acoustic design
Interchangeable sound tubes | Interchangeable audio jacks
*Pictures are for reference only, actual product may vary.
A “volcanic field”was added to the rear of the FD5 in order to reduce low-frequency standing waves, reduce distortion, and overall improve the diffusion of bass waves throughout the FD5. The FD5 also adopts a semi-open design, which relieves air pressure on the ear – leading to more comfortable and long listening sessions.
Anti-standing wave and semi-open design
Other diaphragms
Materials with weak rigidity are slower to respond to voice coil movements and produce irregular ripple-like movements, causing distortion
FD5 diaphragm
Because of its use of rigid DLC material, the diaphragm is more responsive to voice coil movements for less distortion and more accurate reproduction of sound.
A uniquely timeless
industrial design
2 specially selected
high-performance materials diaphragm
3 revolutionary
acoustic design breakthroughs
FiiO's third generation design is based on carefully-designed curves, evoking majestic mountains and wonderous waterfalls. These curves combined with a faceplate offering two distinctly different textures form a sort of “acoustic art”that needs to be experienced in person.
Curves of natural beauty
Sensitivity
109dB@1mW
Drivers
12mm Beryllium-coated
diamond-like carbon (DLC)
dynamic driver
Max input power
100mW
Unit weight
about 11g
Cable connectors
8 strands of monocrystalline silver-plated copper cable
Cable length
120cm
Frequency response
10Hz ~ 40kHz
Impedance
32Ω@1KHz
Headphone type
Over-the-ear
A sound you actually want
Compared with a multiple-driver IEM, in the FD5 there is only one point from which the sound is produced from a single driver – making for more accurate sound positioning. The flagship-grade dynamic driver and carefully tuned acoustic design also combine to make the FD5 sound wonderfully pleasant to most people's preferences – a relaxed, natural
Casting a strong voice with stainless steel
The smooth, luxurious-feeling 3D embossed stainless steel faceplate represents both form and function – while looking striking, the robust stainless steel also reduces the harmonic distortion of sound inside the FD5. The faceplate provides a striking contrast against the chrome finish of the rest of the FD5 as well.
1.5
Tesla magnetic flux
N52
magnets
Large 12mm dynamic unit
12mm
diameter
Newly developed flagship driver
FiiO has always spared no effort in creating their flagship products. In the FD5 is a newly developed, large 12mm dynamic driver utilizing N52 magnets with a high magnetic flux of 1.5 Tesla - for extremely robust bass and excellent high frequency resolution.
We have conducted much research and experimentation when choosing the materials for our new dynamic driver. By combining the use of Beryllium and diamond-like carbon (DLC), we make full use of the physical rigidity and flexibility properties of the materials to reduce unneeded vibration and appropriately damp sound for improved quality. Overall, the frequency response is balanced and distortion is minimized at all frequency ranges.
Beryllium-coated surround + DLC diaphragm
High-end audio inspired acoustic prism
In order to address the issues that come with the time delay between different sound waves, an acoustic prism system was specifically developed for the FD5. This was inspired by similar technology used for adjusting tweeters in well-known high-end audio products.
Learn More
Art and science in harmony
The stunning curved cylindrical design of the FD5 is actually a benefit for acoustics, as such a design greatly reduces unwanted resonances and reflection of sound waves within the body – allowing every last detail of your music to be faithfully reproduced.
Accessories Included
Earphone cablem,HB5 Storage case,Final MMCX ASSIST
Interchangeable audio jack,Interchangeable sound tube
Bass ear tips (S M L),Balanced ear tips (S M L)
Vocals ear tips (S M L),Foam tips 4
Triple Flange tips (S、L),Manual,Cleaning brush
Large and small
Find something that suits you
Great sound comes from a great fit, which is why the FD5 comes with interchangeable sound tubes in small and large sizes to best fit your ear. The large sound tube is balanced, while the small sound tube presents a lively, more bass-focused sound.
*The small sound tube should be used with the triple-flange ear tips, for deeper insertion and better sound quality.
The included cable is an expanded MMCX design with 8 strands of monocrystalline silver-plated copper cable that perfectly and faithfully reproduces your music. The cable also features interchangeable audio plugs for 2.5mm/3.5mm/4.4mm, you to take advantage of a variety of sources.
Material: High-purity monocrystalline silver-plated copper
Wire diameter: Single wire 0.08mm, strand 24AWG, entire cable 18AWG
Wire count: 19 per strand, 8 strands, 152 total wires
Structure: Litz Type2, each wire is individually insulated
Interchangeable parts for unlimited possibilities
*Interchangeable audio jack is officially licensed from the patent by FABRILOUS
Even the accessories have been thoughtfully considered for the FD5. The included HB5 storage case dutifully protects your earphones, while the included MMCX clips greatly facilitates detaching the MMCX cables.
*MMCX ASSIST is provided in cooperation with Final Inc.
Accessories worthy of the experience